serialem/CameraProperties/CameraProperties_Centuri.txt at main · directelectron/serialem · GitHub

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
#
# CAMERA PROPERTIES: CENTURI OR CENTURIPLUS
#

CameraProperties             0  # Change this to a unique number if there are multiple cameras in your SerialEMproperties.txt file
DEcameraType                 5
DECameraServerIP             127.0.0.1
DECameraReadPort             13240
DECameraWritePort            13240
Name                         Centuri  # Change this to CenturiPlus if you have that model instead
PixelSizeInMicrons           8
CameraSizeX                  4096
CameraSizeY                  4096
XMustBeMultipleOf            2
YMustBeMultipleOf            2
Binnings                     1 2 4 8 16
RelativeGainFactors          1 0.25 0.0625 0.015625 0.00390625
DEImageRotation              0
DEImageInvertXAxis           0
MakesUnsignedImages          1
CountsPerElectron            16
HotPixelsAreImodCoords       1
MaximumXRayDiameter          6
OnlyOneShutter               0
BeamBlankShutter             0
StartupDelay                 0.385
ExtraBeamTime                0.10
BuiltInSettling              0.0
MinimumDriftSettling         0.01
ShutterDeadTime              0.008
Retractable                  0      # Change this to 1 if you have a CenturiPlus
InsertionDelay               5.0
RetractionDelay              5.0
TaskTargetSize               2048   # Change this if desired
Order                        1      # Change this if there are multiple cameras on the microscope
FilmToCameraMagnification    1.2    # Change this to the correct value for your installation
# Create a mag table with the following format:
# RotationAndPixel [MagIndex] [DeltaRotation (999 not measured)] [SolvedRotation (999 not measured)] [Pixel size (nm, 0 not measured)]
EndCameraProperties