Round time total?

[ulek]

Hey,

I have a chart that displays the history of total run time of my hvac system.

one quip that I have is that the total displayed in the header goes all the way to milliseconds.

I don’t need to know the time to that granularity.
Just to nearest minute display would be accurate enough

I’ve done some digging in the q&a and closed issues to see what I could find but didn’t see anything.

Any way that could be achieved?

[suskozaver]

I delt with something similar, I have a lot of Tapo P110 plugs and I've created a sensor to sum them all:

template: - sensor: - name: "Total Current Power" unit_of_measurement: "W" device_class: power state: > {{ [ states('sensor.tapo_p110_delovna_miza_sank_current_power'), states('sensor.tapo_p110_server_current_power'), states('sensor.tapo_p110_pomivalni_stroj_current_power'), states('sensor.tapo_p110_kuhinja_1_current_power'), states('sensor.tapo_p110_kuhinja_2_current_power'), states('sensor.tapo_p110_tekalna_steza_current_power'), states('sensor.tapo_p110_spalnica_current_power'), states('sensor.tapo_p110_jedilna_miza_current_power'), states('sensor.tapo_p110_otroska_soba_current_power'), states('sensor.tapo_p110_hladilnik_current_power'), states('sensor.pralni_stroj_deltaenergy')] | map('float') | sum | round(2) }} availability: > {{ not 'unavailable' in [ states('sensor.tapo_p110_delovna_miza_sank_current_power'), states('sensor.tapo_p110_server_current_power'), states('sensor.tapo_p110_pomivalni_stroj_current_power'), states('sensor.tapo_p110_kuhinja_1_current_power'), states('sensor.tapo_p110_kuhinja_2_current_power'), states('sensor.tapo_p110_tekalna_steza_current_power'), states('sensor.tapo_p110_spalnica_current_power'), states('sensor.tapo_p110_jedilna_miza_current_power'), states('sensor.tapo_p110_otroska_soba_current_power'), states('sensor.tapo_p110_hladilnik_current_power'), states('sensor.pralni_stroj_deltaenergy') ] }}

The | map('float') | sum | round(2) }} did the trick for me.

Hope it helps.

[ulek]

Unfortunately no joy on my end.

I have the variables set as history stat and even if I change precision i still see the time into ms

[tkroukamp]

I have the same issue with my sleep tracking card. This when I have:
as_duration: hour

If I remove it, it looks like this:

I would really like the first option, but displaying only hours and minutes.

[ulek]

@tkroukamp yep removing as_duration: hour made it go to decimal format.

At least for me it's a good stop gap solution but I'm of the same opinion that I would prefer the xh xm format

[vingerha]

I just tried to explain how to deal with this https://community.home-assistant.io/t/apexcharts-card-a-highly-customizable-graph-card/272877/4690